TinSil 80-30 has been tested by an independent laboratory and was found to comply with 21 CFR 177.2600 (as published in the Code of Federal Regulations) for rubber articles intended for repeated use food contact surfaces when accurately measured, thoroughly mixed, and fully cured.FOR INDUSTRIAL/PROFESSIONAL USE ONLY.
Technical Specifications
- Mix Ratio by Weight: 1A:10B
- Shore Hardness: A30
- Pour Time: 45 min.
- Demold Time: 24 hr.
- Cured Color:Peach
- Mixed Viscosity: 17,000 cP
- Specific Volume: 23.7 in/lb
- Specific Gravity: 1.17
- Linear Shrinkage: 0.2 in/in
- Elongation: 383 %
- Tensile Strength: 392 psi
- Die B Tear Strength: 145 pli
- Die T Tear Strength: 43 pli
- Notes: Shake or Stir Part A before use.
Kit Components
| TinSil 80-30 | Components |
| 9-lb kit includes: | 0.9 lb of TinSil 80-30 Part A (~1 pint) 8.1 lb of TinSil 80-30 Part B (~1 gallon) |
| 44-lb kit includes: | 4 lb of TinSil 80-30 Part A (~2 quarts) 40 lb of TinSil 80-30 Part B (~5 gallons) |
LOOKING FOR LARGER SIZES (E.G., DRUM KITS)?
Contact us at 877-935-8906 or [email protected] for help.
