BBS TS-P 17x9in – 6×139.7 – 106.1 CB – ET-12 – Satin Black Wheel

A Motorsport-Proven Wheel Built for 6-Lug Toyota Trucks

BBS built the TS-P as a lightweight, flow formed wheel that carries the brand’s motorsport pedigree into a size that fits 6×139.7 trucks and SUVs. This 17×9 Satin Black version uses a 106.1mm center bore and a negative ET-12 offset, giving Tacoma, 4Runner, and Tundra owners more tire clearance for larger rubber without resorting to a full lift.

Key Features

• Flow formed construction increases strength and reduces weight versus a standard cast wheel
• 17×9 sizing with ET-12 offset adds outward stance and clearance for wider tires
• 106.1mm center bore matches Toyota 6×139.7 hubs directly
• Satin Black finish resists fading and matches modern truck builds
• Engineered and tested to BBS’s motorsport quality standards

Specifications

What’s Included

• 1 BBS TS-P 17×9 Satin Black wheel
• Valve stem (installed by fitting shop)

About BBS

BBS has manufactured wheels for motorsport and street applications since 1970, with a reputation built on precision engineering and rigorous strength testing. The TS-P line brings that engineering to truck and SUV applications that run larger bolt patterns.

FAQ

What is the BBSTS-P179084N1201?

The BBSTS-P179084N1201 is a BBS TS-P 17×9 wheel in Satin Black with a 6×139.7 bolt pattern, 106.1mm center bore, and ET-12 offset, built for Toyota trucks and SUVs running that bolt pattern.

What vehicles use a 6×139.7 bolt pattern with a 106.1mm center bore?

This bolt pattern and center bore combination is common on Toyota trucks and SUVs including the Tacoma, 4Runner, Tundra, and Sequoia, though buyers should always confirm exact bore and offset fitment for their specific vehicle before ordering.

Is this wheel sold as a single unit or a set?

This listing is for one wheel. Order four for a full set.

What offset is this wheel?

This wheel has an ET-12 offset, which pushes the wheel outward slightly for a more aggressive stance and additional tire clearance.

Will this wheel clear larger tires?

The ET-12 offset and 9 inch width are commonly chosen to gain clearance for wider tires compared to a factory offset wheel, though final tire clearance depends on tire size and suspension setup.

Does this wheel require hub-centric rings?

The 106.1mm center bore is matched to Toyota hubs, so hub-centric rings are typically not required on a factory-matched application. Confirm bore fitment for your specific vehicle before installing.

What finish does this wheel have?

This wheel comes in a Satin Black finish.

Is this a flow formed or cast wheel?

The BBS TS-P is a flow formed wheel, which is lighter and stronger than a standard cast wheel of the same size.

Install Instructions

1. Raise and support the vehicle, then remove the factory wheel.
2. Confirm the center bore and bolt pattern match your hub before mounting.
3. Mount the wheel onto the hub and hand-thread the lug nuts.
4. Torque lug nuts in a star pattern to the vehicle manufacturer’s specification.
5. Lower the vehicle and re-torque after the first 50-100 miles of driving.