Aardwolf Hand Vacuum Cup
The Aardwolf Hand Vacuum Cup Lifter is a vacuum lifter for handling smooth, non-porous material. It is rated at 265 lb (120 kg), a 8.7″ (220 mm) pad. Built from aluminum with rust-resistant parts. Unit weight 3.2 lb (1.5 kg).
Features
- 265 lb (120 kg) working load limit
- 8.7″ (220 mm) vacuum cup
- Weighs 3.2 lb (1.5 kg)
- Built from Aluminum with rust-resistant parts
Specifications
| Property | Detail |
|---|---|
| Brand | Aardwolf |
| Working Load Limit | 265 lb (120 kg) |
| Cup Diameter | 8.7″ (220 mm) |
| Net Weight | 3.2 lb (1.5 kg) |
| Gross Weight | 4.4 lb (2.0 kg) |
| Material | Aluminum with rust-resistant parts |
| Gauge | Integrated vacuum gauge |
| Vacuum Generation | Manual pull-pump; three pumps produce high vacuum |
| Surface Type | Flat, smooth non-porous surfaces only |
| Packaging Dimensions | 10.6″ x 10.6″ x 4.3″ (270 x 270 x 110 mm) |
| Included | Protective carrying case |
| Country of Origin | Vietnam |
How to Use & Handling
- Inspect the vacuum pad seal for cuts, grit, or compression set before each shift.
- Charge or connect the pump power supply and confirm it primes.
- Seat the pad flat on clean, sound, non-porous material with no chips or seams under the seal.
- Draw vacuum and wait for the gauge to reach the safe zone before taking any load.
- Lift slowly and keep the load low; never stand or pass under a suspended load. Never exceed the rated 265 lb (120 kg).
- Set the material down fully, then release vacuum and vent the pad.
Videos
Vacuum Cup, best on the market – Aardwolf | Aardwolf
