3D ONE Hybrid cutting compound and finishing polish provides rapid results due to nano ceramic alumina abrasives. Achieve professional-level paint scratch correction using either a DA or rotary polisher. This one-of-a-kind product is simple to apply and cleanup, and always yields the ideal finish.
HOW-TO:
IMPORTANT: Always work on a clean, cool surface in the shade. Car should already be washed and dried and if needed, use detailing clay first to remove any above surface bonded contaminants.
By orbital polisher
Step 1: Apply 4-5 nickel sized drops of product to the face of the pad.
Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.
Step 3: Turn polisher to high speed and begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.
Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.
Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels.
By rotary polisher
Step 1: Apply a circle of product around the middle of the face of the pad.
Step 2: Using a slow to medium speed, spread product out over a section of paint no larger than 2’x2’.
Step 3: Using a low to medium speed, begin working the product over the panel using an overlapping, crosshatch pattern for 2-4 minutes.
Step 4: Move onto a new section of paint and repeat the above process until an entire panel has been worked with 3D ONE.
Step 5: For best results, remove residue immediately after buffing using a clean, dry microfiber towel. Turn the towel over or fold to a clean side often. For best results, use plenty of clean, dry soft microfiber towels. Repeat this process to the rest of the vehicle.
